![]() |
Changing RAID mode |
Post Reply ![]() |
Author |
![]() ![]() |
reaper ![]() Admin Group ![]() ![]() Joined: 27 Jan 2022 Status: Offline Points: 351 |
![]() ![]() ![]() ![]() ![]() Posted: 24 Jun 2024 at 5:34pm |
if Change to RAID mode from AHCI mode or IDE mode without re-installing OS 1.Exit all Windows-based programs. 2.Press [Win] + R or take the RUN option from the start menu. 3.Now type regedit there and press Enter Key to open up the Registry Editor Window. 4.If you receive the User Account Control dialog box, click Continue. 5.Locate and then click the following registry subkeys: Code: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\msahci HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\iaStorV HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\iaStor 6.In the right pane, right-click Start in the Name column, and then click Modify. 7.In the Value data box, type 0 [3 is default], and then click OK. 8.On the File menu, click Exit to close Registry Editor. 9.Restart your computer 10.Go to UEFI/BIOS and enable RAID, Save & Reboot 11.Another restart will be required to finish the driver installation. sudo nano /etc/network/interfaces Enter your root password, once your prefered editor opens the file you can see... auto lo eth0 iface lo inet loopback iface eth0 inet dynamicIf you have more than one network card, please be sure to make changes to the correct network interface. Statically configured network cards will have a section like: auto lo eth0 iface lo inet loopback iface eth0 inet static address xxx.xxx.xxx.xxx(enter your ip here) netmask xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx(enter gateway ip here Manually restart your network interface with the new settings: sudo /etc/init.d/networking restart 53.25 watt hour for battery life sudo fdisk -l Find your device in the list, it is probably something like /dev/sdb1. For more information about filesystems, see LinuxFilesystemsExplained. Create the Mount Point Now we need to create a mount point for the device, let's say we want to call it "external". You can call it whatever you want, just please don't use spaces in the name or it gets a little more complicated - use an underscore to separate words (like "my_external"). Create the mount point: sudo mkdir /media/external Mount the Drive We can now mount the drive. Let's say the device is /dev/sdb1, the filesystem is FAT16 or FAT32 (like it is for most USB flash drives), and we want to mount it at /media/external (having already created the mount point): sudo mount -t vfat /dev/sdb1 /media/external -o uid=1000,gid=1000,utf8,dmask=027,fmask=137 The options following the "-o" allow your user to have ownership of the drive, and the masks allow for extra security for file system permissions. If you don't use those extra options you may not be able to read and write the drive with your regular username. Otherwise if the device is formatted with NTFS, run: sudo mount -t ntfs-3g /dev/sdb1 /media/external Installing the BXbenchV1556 first you have to change permissions on the folders sudo chown -R username:username /var/www/html/html Then you can just drop the bxbench_v1556.tgz into the folder html, then select extract. ALL DONE! ====================================================================================================== how to create ubuntu ISO USB ===================================== _on_a_USB_flash_drive =============================================================================== Isntalling Chrome OS ================================================================================ ===================================BKMS============== \\VMSPFSFSFM23\ClientBKMsWLs\Setup\Misc Files 90D3D-6B277-F69C3-AE8CB-CED41 MM12 =======================EEMBC==================================== Installing To run this benchmark you will need the following hardware : Server specs Processor: x86 quad core 2GHz or better Memory: 4Gb DDR2 or better Router specs Wifi router: DLink DIR-615 or better And the following software : Install Ubuntu linux 10.04.1 (lucid lynx, stable) Install Apache version 2.2.14-5 (sudo apt-get install apache2/lucid=2.2.14-5) Install PHP version 5.3.2-1 (sudo apt-get install php5/lucid=5.3.2-1) Once the server is up and running, install the benchmark : 1 Copy the benchmark distribution to the server and unpack it in /var/www/html sudo mkdir -p /var/www/html && sudo chmod a+wx /var/www/html cd /var/www/html && tar -vzxf <path to tarball> 2 Create a writeable folder for the server to save results. mkdir /var/www/html/bench/results && chmod a+wx /var/www/html/bench/results 3 Update the apache2 configuration to run the benchmark cd /var/www/html/install && chmod +x ubuntu_bbench.sh && sudo ./ubuntu_bbench.sh sudo apache2ctl restart 4 Enable apache user to run /sbin/tc as super user + sudo visudo In vi, add the following line to the end of the file: www-data ALL = NOPASSWD: /sbin/tc Running in server mode From a client running a browser, go to the server ip address or hostname. You will see the following the browsing bench interface. From here you can : 1 - Press START to start the benchmark running. 2 - Select a folder on the server to save the results, and enter platform details for the log. 3 - Select the help panel to see a reference for all of the user interface options. 4 - Select ENABLE ENGINEERING MODE from the control panel to enable advanced options. Note On the server, you can monitor the progress of the current run of the benchmark as follows: cd /var/www/html watch ./progress.sh |
|
![]() |
|
Sponsored Links | |
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You can post new topics in this forum You can reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You can create polls in this forum You can vote in polls in this forum |