|
Post Reply - Dell Poweredge R610 Fan speed |
| Post Reply |
| Message |
| Topic - Dell Poweredge R610 Fan speed Posted: 30 Jan 2022 at 1:55pm By reaper |
|
Howto: Setting the fan speed of the Dell R610/R710 Enable IPMI in iDrac Install ipmitool on linux, win or mac os Run the following command to issue IPMI commands: ipmitool -I lanplus -H <iDracip> -U root -P <rootpw> <command> Enable manual/static fan speed: raw 0x30 0x30 0x01 0x00 Set fan speed: (Use i.e http://www.hexadecimaldictionary.com/hexadecimal/0x14/ to calculate speed from decimal to hex) 3000 RPM: raw 0x30 0x30 0x02 0xff 0x10 2160 RPM: raw 0x30 0x30 0x02 0xff 0x0a 1560 RPM: raw 0x30 0x30 0x02 0xff 0x09 Note: The RPM may differ from model to model Disable / Return to automatic fan control: raw 0x30 0x30 0x01 0x01 Other: List all output from IPMI sdr elist all or full Example of a command: ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x10 ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x23 for 35% speed 192.168.1.125 host 192.168.0.120 IDRAC
|
