Dell Poweredge R610 Fan speed

Message Topic Search Topic Options Post Reply Create New Topic Create New Poll Printable Version Translate Topic

   Howto: Setting the fan speed of the Dell R610/R710
Enable IPMI in iDrac
Install ipmitool on linux, win or mac os
Run the following command to issue IPMI commands: ipmitool -I lanplus -H <iDracip> -U root -P <rootpw> <command>
Enable manual/static fan speed:

raw 0x30 0x30 0x01 0x00

Set fan speed:

(Use i.e http://www.hexadecimaldictionary.com/hexadecimal/0x14/ to calculate speed from decimal to hex)

3000 RPM: raw 0x30 0x30 0x02 0xff 0x10

2160 RPM: raw 0x30 0x30 0x02 0xff 0x0a

1560 RPM: raw 0x30 0x30 0x02 0xff 0x09

Note: The RPM may differ from model to model

Disable / Return to automatic fan control:

raw 0x30 0x30 0x01 0x01

Other: List all output from IPMI

sdr elist all or full

Example of a command:

ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x10

ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x23 for 35% speed

192.168.1.125 host

192.168.0.120 IDRAC

Author	Message Topic Search Topic Options Post Reply Create New Topic Create New Poll Printable Version Translate Topic
reaper Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 27 Jan 2022 Status: Offline Points: 357	Post Options Post Reply Quote reaper Report Post Thanks(0) Quote Reply Topic: Dell Poweredge R610 Fan speed Posted: 30 Jan 2022 at 1:55pm
	Howto: Setting the fan speed of the Dell R610/R710 Enable IPMI in iDrac Install ipmitool on linux, win or mac os Run the following command to issue IPMI commands: ipmitool -I lanplus -H <iDracip> -U root -P <rootpw> <command> Enable manual/static fan speed: raw 0x30 0x30 0x01 0x00 Set fan speed: (Use i.e http://www.hexadecimaldictionary.com/hexadecimal/0x14/ to calculate speed from decimal to hex) 3000 RPM: raw 0x30 0x30 0x02 0xff 0x10 2160 RPM: raw 0x30 0x30 0x02 0xff 0x0a 1560 RPM: raw 0x30 0x30 0x02 0xff 0x09 Note: The RPM may differ from model to model Disable / Return to automatic fan control: raw 0x30 0x30 0x01 0x01 Other: List all output from IPMI sdr elist all or full Example of a command: ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x10 ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x23 for 35% speed 192.168.1.125 host 192.168.0.120 IDRAC

Sponsored Links